A flexible atomizer
Hellvape is again with the Dead Rabbit V3 RTA.
Like its predecessors, it has a dual-coil deck and a prime airflow system, and is nearly faultless.
It is designed for direct to lung vaping. Its airflow adjustment system lets you swap from barely restricted DL to very ethereal with out shedding something of the flavours. The solely draw back lies within the measurement of its deck.
|Capacity||3.5 / 5.5ml|
|Assembly sort||Simple and sophisticated|
|Mounting plate||Double coil|
|Range of use||Depends on meeting|
What’s within the field?
- Spare tank
- Spare elements
- User information
Topped with a 810 format drip tip, the highest cap has a quarter-turn launch system. Little notches give an ideal grip to open it. The airflow adjustment ring is positioned slightly below. It has 2×7 grooves measuring 3x1mm. A cease limits its rotation, starting from fully closed to fully open. It is held firmly in place on the atomizer physique by a seal.
The complete atomizer is manufactured from chrome steel. It is stuffed via two kidney-shaped holes. Their measurement means most e-liquid bottles available on the market can be utilized apart from the biggest Twist sort. A cone-shaped channel avoids any overflows when filling. A big O-ring ensures there are not any leaks between the highest cap and the atomizer physique. The Dead Rabbit V3 RTA comes fitted with a straight glass tank containing 3.5ml. A bubble glass is offered within the field, permitting you to extend the atomizer quantity to five.5ml.
The title of the atomizer and the useless rabbit emblem are engraved on the dome. The inside the atomisation chamber is ultra-reduced, which actually concentrates the flavours. The airflow comes from the edges and enters the deck via two large openings on the underside of the reducer.
The base of the Dead Rabbit V3 RTA measures 25mm in diameter, however shortly flares out to 27mm. This conical form could also be an issue for the selection of mod if you need issues to line up completely. The optimistic pole of the 510 connector is lengthy sufficient to be used on a hybrid mech mod.
A quite small deck
The deck is postless. It has 4 excellent high quality flat screws. Four BTR screws are offered within the bag of spare elements, along with a full set of spare seals, a flat spanner and a BTR key.
A large peek insulator electrically insulates the optimistic publish from the remainder of the deck which is formed out of a single piece. A large O-ring ensures there are not any leaks with the physique of the atomizer.
The energy of the Dead Rabbit V3 RTA lies in its airflow redirection system which sends the air to the edges and backside of the coils. Coupled with a really small atomisation chamber, this atomizer supplies a dense, fragrant vape.
Installing the coils doesn’t pose any explicit downside. Simply minimize the legs utilizing the information offered and match them within the posts. Hellvape recommends a top of 5mm. We suppose this measurement is ideal.
The solely weak level of this RTA is the small measurement of its deck. Although putting in 3mm coils doesn’t pose any explicit downside in itself, this isn’t the only option. Given the house between the 2 airflow grids, the coils are virtually touching, which hinders the air circulation within the atomisation chamber. This is mirrored within the vape. You sometimes get an impression of poor air flow.
Inserting the cotton can be difficult. The measurement of the wick slots may be very slim. You should be actually cautious to fluff out the cotton if you wish to keep away from interrupting the wicking and getting a dry hit, however on the similar time depart ample to make sure there is no such thing as a threat of filling the atomisation chamber by the “speaking vessels” precept.
This operation could be very troublesome for rebuildable newbies.
We most popular to make use of coils 2.5mm in diameter.
In this construct configuration, the air circulates higher within the chamber. The flavours are vastly improved and the expertise is far more satisfying. Inserting the cotton is far less complicated and doesn’t pose any explicit downside.
Vaping with the Dead Rabbit V3 RTA is especially good. Mounted on a mech mod with a pair of Ni90 3×28/38 Aliens stabilised at 0.12 ohms and with the airflow absolutely open, it produces big, dense, heat clouds, excellent for individuals who love connoisseur flavours. The flavours are wonderful. With a pair of Ni80 2×27/38 Fused Clapton stabilised at 0.18 ohm and 60W on an digital field with the airflow half-closed, it’s simply nearly as good. The vapour density remains to be wonderful and the flavours are there.
What we like
- Build high quality
- Easy to construct with 2.5mm coils
- Good vapour manufacturing
- Excellent flavours
What we don’t like
- Difficult to construct with 3mm coils
- Change of the bottom diameter 25/27mm