Home Business Review: Mod SuiSide Tube – Suicide Mods

Review: Mod SuiSide Tube – Suicide Mods

0
review:-mod-suiside-tube-–-suicide-mods

The SuiSide Tube mod is a mech mod by the American model Suicide Mods. It’s compact and the end is flawless. It can use 20700 and 21700 batteries, and take atomizers as much as 30mm broad. All of that provides as much as a responsive mech tube designed for followers of huge clouds.

A beast of a tube

Beneath its chunky exterior, the SuiSide Mod Tube is a extremely responsive mech tube. It’s full of small particulars that make it snug to make use of and highly effective. The title SuiSide comes from the tab-shaped swap on the facet of the mod. This system works rather well and is straightforward to take care of.

Technical specs

Dimensions 33 x 79mm
Weight 181.5g
Battery measurement 20700, 21700
Charging External charging
Max. atomizer diameter 30
Modes accessible Mech

What’s within the field?

  • Mod
  • Spare components

Superbly properly designed

The high of the SuiSide Mod Tube is finely engraved with the mannequin title and serial quantity. The engraving is clear and deep, and provides to the general impression of the standard of this tube. When the atomizer’s screwed onto the mod, that is hidden for added discretion. The connector is a hybrid. The optimistic pole is in direct contact with the battery. Like any mech mod, you need to comply with all important security guidelines so that you don’t put your self at any danger. You should use the best meeting for the battery, which must be in good situation. The atomizer wants a 510 connector lengthy sufficient to be in direct contact with the battery. Some individuals love mech vaping, however it might be a disgrace to reveal your self to pointless dangers if you happen to go too far. The SuiSide Mod Tube can take a 30mm broad atomizer, which is most generally accessible atomizer for a mod of this measurement.

The backside of the mod can be engraved with the model’s title and brand. Again, it’s superbly executed and discreet. The cowl of the Side Mod Tube is made from Delrin, a robust however light-weight materials.

There are 4 small drilled holes on the base of the tube. These aren’t degassing vents, they’re air retailers that allow air out when the quilt is being fitted onto the mod. These layers match collectively very intently. Putting the mod sleeve again on with out these drilled holes can be troublesome. It’s properly thought out and works completely.

What’s unique in regards to the SuiSide Mod Tube is the swap positioned alongside the tube. It’s tab-shaped and held in place by two screws on the high. If you need to customise it, the additional set of gold screws within the field will make your mod look extra uniform. The swap is grooved to provide higher grip whenever you use it. It’s a bit stiff to push however will get barely simpler with use. Just bear in mind that the mod isn’t lockable, so watch out if you happen to’re on the transfer.

What a vape!

Taking off the quilt of the SuiSide Tube Mod reveals a copper tube. Three seals positioned one above the opposite on the base of the tube guarantee it stays inside its Delrin sleeve. The match could be very comfortable and there’s no danger of both half coming aside by itself. It comes with a set of spare seals in case they degrade. The copper tube is simply over 2.2mm thick.

The mod could be very straightforward to function. Pressing the swap makes contact with the interior copper tube and closes the circuit. When you launch it, the circuit opens and the mod stops making vapour. The hole between the swap tab and the copper tube is slender, however not so slender that it may possibly hearth with out you intentionally urgent it. Some customers would possibly discover the swap a bit stiff however you really get used to it in a short time. Plus, the contact pad you press is sort of 23mm excessive, so it’s snug to make use of!

The copper tube screws onto an Ultem part. There’s no have to unscrew these two components whenever you’re cleansing it, simply clear the contact areas between the swap and the copper tube. In the long term, attempt to keep away from taking aside these components too usually. Plastic components involved with steel components are likely to degrade after they get dealt with too usually. The Ultem part screws onto the highest of the tube.

You can dismantle the contact tab. It’s on the highest of the mod and is held in place by two screws. A niche between the screw holes and the Ultem part acts as a battery degassing vent. It’s sufficiently big to make the mod a bit of safer to make use of.

The package comes with two swap tabs. One of the tabs is barely extra concave within the center, so utilizing it makes vapour for longer. This is kind of an attention-grabbing possibility that offers vapers a number of alternative.

When it involves vaping, the SuiSide Mod Tube works impressively properly. It could be very responsive, strong and compact, and is snug to make use of. It gained’t slip in your hand and you may’t assist however discover its weight and the way sturdy its parts are. The swap is a bit totally different from the standard set off system beneath the tube, and has a big contact space. It virtually seems like urgent a hearth button on an digital mod. Cleaning it’s straightforward – you simply take away the Delrin cowl and clear the contact areas. The undeniable fact that it takes 30mm diameter atomizers means the mod will please vapers who like huge kits for giant clouds. The SuiSide Mod Tube does the job beautifully. It seems like a high-end mannequin however prices beneath 100 Euro – what extra can we are saying?

The SuiSide Mod Tube and the Nightmare RDA 28 mm by Suicide Mods

In abstract

What we like

  • Format
  • Takes atomizers as much as 30mm
  • Battery measurement
  • Two switches
  • Very responsive

What we don’t like

  • Nothing

Exit mobile version